Wanted Side vents of Zender Cup kit

[Karsten916 3]

Hi all,

I am looking for the side vents of the cup kit, preferably in red color.

Can anybody help? ;-)

Thanks!

Karsten

[CornishSteve 15]

http://www.ebay.co.uk/itm/Alfa-Romeo-Gtv-Spider-Cup-Kit-/261778665682?pt=LH_DefaultDomain_3&fits=Car+Make%3AAlfa+Romeo%7CModel%3ASpider&hash=item3cf33970d2 Edited March 9, 2015 by CornishSteve

[Gaincho 57]

Anybody bought him??

 

I'm thinking of side wings and skirts, but I don't know which have best quality, these or the ones from pj motors

[alexx230 22]

I m the guy that sells them on ebay. I ve been trying really hard for over 2 years to achieve a decent result. I think i finally made it. ;-) Both the wings and the side skirts are very accurately copied and of high quality. Even the stock mounting holes have been marked to the copies, as a reference point. I ll take an extra 10% off for everyone that wants to order through here :-)

[reveds1969 20]

Evening Gents just about to sell my Original Zender wings and skirts in Rosso Red if your interested let me know.

[reveds1969 20]

Hi all,

I am looking for the side vents of the cup kit, preferably in red color.

Can anybody help? ;-)

Thanks!

Karsten

 

 

Anybody bought him??

 

I'm thinking of side wings and skirts, but I don't know which have best quality, these or the ones from pj motors

 

 

Evening Gents just about to sell my Original Zender wings and skirts in Rosso Red if your interested let me know.

[Gaincho 57]

I m the guy that sells them on ebay. I ve been trying really hard for over 2 years to achieve a decent result. I think i finally made it. ;-) Both the wings and the side skirts are very accurately copied and of high quality. Even the stock mounting holes have been marked to the copies, as a reference point. I ll take an extra 10% off for everyone that wants to order through here :-)

 

 

Good to know that.

 

I'm still a bit doubtful, but if I finally decide to, I will get them from you. Cheers!

 

PD: BTW, do you know where can I get the mesh for the wings??

[charlee 314]

I m the guy that sells them on ebay. I ve been trying really hard for over 2 years to achieve a decent result. I think i finally made it. ;-) Both the wings and the side skirts are very accurately copied and of high quality. Even the stock mounting holes have been marked to the copies, as a reference point. I ll take an extra 10% off for everyone that wants to order through here :-)

Have you copied the rear also? There is a 'wall' on the original wings.

[alexx230 22]

Good to know that.

I'm still a bit doubtful, but if I finally decide to, I will get them from you. Cheers!

PD: BTW, do you know where can I get the mesh for the wings??

I got mine from a local blacksmiths store. Either there or from a shop that sells gardening stuff, perhaps?

What do you mean exactly charlee?

I can take some back face pics

Edited March 12, 2015 by alexx230

[charlee 314]

Please take a pic.

There is a divider on the rear of the wing. Otherwise you can see the wing from the inside when you open the door

[alexx230 22]

I see what you mean charlee. No in the last sets i haven't copied that "flap". I could copy it to a new set though ;-)

It doesn't affect the alignment ;-)

Edited March 12, 2015 by alexx230

[charlee 314]

It shouldn't affect alignment, but it should at least block the view to the rear of the wing

[alexx230 22]

You are right, i ll see if i can "fix" this... ;-)

[A6C 15]

PD: BTW, do you know where can I get the mesh for the wings??

You can still get the genuine vented wing mesh inserts from Alfa, I've just bought some !!

My CUP Front Vented Wings Inserts Thread http://www.alfaowner.com/Forum/showthread.php?t=794818

Edited March 15, 2015 by A6C

[Gaincho 57]

Thanks, A6C!

[charlee 314]

Do you have a link for those?

[Gaincho 57]

Do you have a link for those?

 

I thought you were thinking in taking sidewings out, not buying new things for them 

[charlee 314]

I'm not 100% on that

[alexx230 22]

Back "flap" added and the kit is now complete

[jonalfaspider 107]

Do you sell the cup front splitter, I think your replicas look good I have just never been a fan of the sides I prefer the biscione ones they seem to suit the lines of the car better IMHO

[alexx230 22]

Sorry mate no. :-( I haven't managed to source an original, in a decent condition to duplicate it.

[WillieNillie 32]

http://www.ebay.co.uk/itm/New-Original-Genuine-Alfa-Romeo-GTV-Cup-Lower-Front-Spoiler-Splitter-kit-5901244-/271780731104?&_trksid=p2056016.m2518.l4276

is the only one on ebay thats original but not in stock at the moment, 

 

If you can get a replica made from the original with the part number on the bottom like the original then i can get the TUV certification from Zender and get my GTV registered as a cup car or at the very least get the styling verified in my motor certificate. Not that i need it but it would be nice, seeing as there are only 2 of this car in my city and the police has no idea what is original and what is not. if there is something unoriginal on the exterior of your car and its not certified your car will be taken off the road until you replace it with oem.

Edited April 11, 2015 by WillieNillie

[Corseart Car Parts 5]

Hey guys,

 

seems that a lot of people are interested in them wings. I have two original pairs of them here, one in black 601 and black metallic 632

[jonalfaspider 107]

I'm after the side skirts n front splitter

[alexx230 22]

http://www.ebay.co.uk/itm/New-Original-Genuine-Alfa-Romeo-GTV-Cup-Lower-Front-Spoiler-Splitter-kit-5901244-/271780731104?&_trksid=p2056016.m2518.l4276

is the only one on ebay thats original but not in stock at the moment,

If you can get a replica made from the original with the part number on the bottom like the original then i can get the TUV certification from Zender and get my GTV registered as a cup car or at the very least get the styling verified in my motor certificate. Not that i need it but it would be nice, seeing as there are only 2 of this car in my city and the police has no idea what is original and what is not. if there is something unoriginal on the exterior of your car and its not certified your car will be taken off the road until you replace it with oem.

If i remember right, my replica kits do have the oem part numbers copied on them. I ll check it out and get back to you.

I am trying to source an original, used, front splitter that i can borrow to make the copy, cause buying a new one is not an option atm