Welcome to Squadra916

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

Paso

GTV 3.0 V6 24V Paso

184 posts in this topic

I just realised that I have never opened a thread for mine! :)

Today we had a small tuning & styling car show in Rijeka, so I took the chance for a nice photo!

I call this "Red on red"! :)

post-3-0-61525400-1365977739_thumb.jpg

Share this post


Link to post
Share on other sites

I like the next one even more. At first I thought that the red wall behind will be a problem (it's a Kika store in Rijeka), but at the end it turned out as a great backdrop!

post-3-0-88365500-1366067211_thumb.jpg

Share this post


Link to post
Share on other sites

One more in "Rosso su rosso" series... ;)

It seems that our GTVs are beautiful from just about every angle! It's really hard to make a bad photo of 916!

post-3-0-02073700-1366412436_thumb.jpg

post-3-0-81306100-1366587589_thumb.jpg

Share this post


Link to post
Share on other sites

Great car and photos :thumbsup: . Write something more about the car. I asked you about your brake setup some times ago (before I join this forum), will be good to write something about that on here :) .

Share this post


Link to post
Share on other sites

Thanks Joris! :) The main advantage of such large disks is that it's impossible to overheat them on the road, and it's hard to do it even on the track. Also, as the callipers are on the longer arms, they seem to be more efficient so I felt there is no need to go for more powerful six pot brakes. As the disks are grooved and drilled the brakes are loud (you can hear wuuussshhh sound) and that is something I especially love as it's easier to drive when you have sound feedback from the brakes.

Thanks to the light alloy centre piece the disks are not so much heavier than the original setup. Light alloy is quite fragile and during years I had to replace one dish as it cracked on several places after I got pads stuck because of rust on disks after some rain and a week of non-use.

19" wheels are must with such setup as 18" usually doesn't fit. Some 18" does fit (OZ Crono for example) but there is just 1 mm between the calliper and the wheel and I felt very uncomfortable with that (even a small stone between could do a lot of damage).

Share this post


Link to post
Share on other sites

Well, you can't be more precise - I'll have a new set of photos this Sunday as we have traditional annual Alfa meet in Rijeka! :)

Share this post


Link to post
Share on other sites

A few photos shot at the annual Alfisti meeting in Rijeka:

 

post-3-0-56804100-1371165638_thumb.jpg

 

post-3-0-48254000-1371165689_thumb.jpg

 

post-3-0-10774200-1371166051_thumb.jpg

 

In the queue...

 

post-3-0-71201400-1371166166_thumb.jpg

 

Around the track...

 

post-3-0-64354800-1371165953_thumb.jpg

 

post-3-0-67364200-1371166091_thumb.jpg

 

post-3-0-48353200-1371165969_thumb.jpg

 

post-3-0-52246500-1371165885_thumb.jpg

 

Brand new tyres after a few laps at the Grobnik race track...

 

post-3-0-14842700-1371165718_thumb.jpg

 

The old one, still impressive...

 

post-3-0-35563500-1371166017_thumb.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Recently Browsing   0 members

    No registered users viewing this page.

Welcome to Squadra916

Squadra916 is the largest international community for owners and fans of Alfa Romeo GTV and Spider 916 cars.