GTV 2.0 TS Lusso

[BraneGTV 14]

It's time to present my GTV, I'm done a few modifications: xenon 6000k, painted brake calipers,led interior illumination. I'm doing p2 console conversion like Charlee, it should be done in a few days!

[Paso 239]

Welcome to the international part of Squadra! We are looking forward to see your P2 console upgrade project!

[charlee 314]

He is out of his mind

[BraneGTV 14]

I can't be normal and drive a GTV!!! I't your fault that you're prove that it's possible to make conversion,and i like extreme challenges.

[charlee 314]

Yes, it can be done. But it takes time.

It pays off in the end

[Alfa_gtv 4]

Picture from Sljeme are amazing good looking gtv

[BraneGTV 14]

Finally got some time to upload photos of work in progress conversin console.

On this pictures you can see how p1 and p2 consoles is glued together in one piece

All silver parts sanded and prepered to putty

Little bit playing with putty

And again more sanding

After first coat of primer

Paint job finished, not perfect. First time doing with fiberglass putty,and next time it's going to be a lot better.

This is how it look under the console before mounting in the car

Mounted ventilation with alu rings from 166

Bought the p2 switches to do complete conversion

Console is mounted and looks like this,just need to repaint it,becouse it has few mistakes and i think that's going to be a lot better

[Toshko 10]

nice job Brane Look much better!

next mods i guess are steering wheel form pf2 and gear knob?

[BraneGTV 14]

I'm waiting for steering wheel from p2,i'll install it on spring. soon getting more upragedes,one of them are 4pot brembo's and 18" rims

[Toshko 10]

I'm waiting for steering wheel from p2,i'll install it on spring. soon getting more upragedes,one of them are 4pot brembo's and 18" rims

nice project

witch model alloys you like?

4pot brembo is from kappa/166 or 3l gtv?

[BraneGTV 14]

brembos's from 166 big calipers. some day hoping to buy 8c rims from Giullieta, but for now got to be happy with arospeed rs gt because it was ridicoulos low price,and i emergency needed 18"

[Alfa_gtv 4]

waiting for updates...

go brane

[BraneGTV 14]

Eibach pro-kit, 4pot brembo & 340mm discs in da house and waiting to install. Yesterday mounted 18"

[Paso 239]

Woah! Quite an upgrade! Can't wait to see it!

[kunev 131]

Nice pictures of the car! This is rare color and I haven't see many with this color. Waiting for the new pictures with upgrades. 340mm discs are big one, especially for TS. What is their thickness? From what car are they or they are aftermarket rotors with custom made bells? I want to see close look of this package. The original discs on 166 are 310mm so these 340mm are on the big side for these calipers. Did your pads have full contact area with the discs?

[Alfaduden 226]

Nice Proteo rosso. My dad had one in similar colour!

Good luck with the upgrades! We want pictures!!!

[BraneGTV 14]

Nice pictures of the car! This is rare color and I haven't see many with this color. Waiting for the new pictures with upgrades. 340mm discs are big one, especially for TS. What is their thickness? From what car are they or they are aftermarket rotors with custom made bells? I want to see close look of this package. The original discs on 166 are 310mm so these 340mm are on the big side for these calipers. Did your pads have full contact area with the discs?

discs are from Porsche 986 with custom made bells,pads have full contact with discs. little change of plan becouse i buyed used discs one of them is damaged and i'm going to buy 330mm discs from mercedes c350sportcoupe,just need to make new holes for 5x98. New pictures soon!

[BraneGTV 14]

Some refreshing of my garage, bought cup spoiler,p2 steering wheel and rear wheel bearing

Eibach springs waiting for instalation

Red carpet is ready

Roof lining is also new

Friend sold me his 17" until i find Teledials

Today mounted wheels, and the higlight of the day was when one wheel nut is broke.

Sent from my HTC EVO 3D X515m using Tapatalk

[BraneGTV 14]

Some pics with old setup on Arospeed 18"

Sent from my HTC EVO 3D X515m using Tapatalk

[Damgreg 94]

Hmmm good taste Idon't really like the 17" rims but its your gtv

Is your steering wheel brand new?? 

[BraneGTV 14]

This rims is just for few weeks driving, searching for teledialsB). Steering wheel is used but in good condition. I'm not satisfied with that,so next week it's going to be reupholstered in black leather with red stitching

Sent from my HTC EVO 3D X515m using Tapatalk

[Damgreg 94]

I think I'll do that too... Mine is burnt by the sun... My spider laid to much time under the sun... Everything was burnt

[Filip 124]

The first set of 17" wheels look a lot like the Stilauto Ghibli. I don't like them that much, but I still bought a well used set    ...

 

I like your mods. I think I can speak for everyone in here and say that we want pics of the brake upgrade! 

[kunev 131]

Nice parts waiting for installations  . Do you think to paint the lower black bodywork parts in the color of the car?

[BraneGTV 14]

First 17" was Alessio Carrera, i like them but always wanted 18". Handling on 17" is much better so Arospeeds is sold. Brakes is not installed because i'm saving money for 330 front and 295 rear discs.

It's plan to paint the whole car,it need a refresh.

Sent from my HTC EVO 3D X515m using Tapatalk