Zoe Yellow Spider

[butt head 43]

the adapter plates have still quite some work to fit propely .

to inlet runners are skewed and not in line.

 

so that needs a lot of after thinking.

 

 

last Friday I bought a ecu for the engine. 
She will run on a DTA S80 pro ecu.

 

last week I have bought another small project. a very poor looking gtv 3.0 24v

the car getting a little refurbished and cleaned. then another few months driving around and resell it.

 

[butt head 43]

After a bit of tinkering she runs again.

Luckily it wasn't a leak headgasket as the previous owner claimed.

 

There was s too long radiator hose mounted that a kinked in front of the radiator, leaving the radiator withoud coolant flowing through it.

which resulted in an engine that overheated and a radiator the couldn'd handle the pressure.

 

After changing the radiator and cooling hoses she runs perfectly again.

 

things to do to get it back road legal.

som smal parts of the brake line's 

powerflex in the supporting arms at the rear.

new supporting arms at the front

new tyres 

timing belt 

 

[Filip 124]

2 hours ago, butt head said:

After a bit of tinkering she runs again.

Luckily it wasn't a leak headgasket as the previous owner claimed.

 

There was s too long radiator hose mounted that a kinked in front of the radiator, leaving the radiator withoud coolant flowing through it.

which resulted in an engine that overheated and a radiator the couldn'd handle the pressure.

 

After changing the radiator and cooling hoses she runs perfectly again.

 

things to do to get it back road legal.

som smal parts of the brake line's 

powerflex in the supporting arms at the rear.

new supporting arms at the front

new tyres 

timing belt 

 

 

Good job! I bet a simple wash and some polish would make it look 10x better too 

[butt head 43]

 

[butt head 43]

and the engine starts even though look a bit more beautiful.

 

[GTV-TB 315]

Sparkling ,  but timing belt cover needs a touch up.

[butt head 43]

5 minutes ago, GTV-TB said:

Sparkling ,  but timing belt cover needs a touch up.

 

that comes with the belt Exchange. 
 

 

 

Hopefully he 6 april road legal again 

[butt head 43]

the gtv is still not road legal, but it is closer then a cople of weeks a go 

 

 

 

 

[joeGTV 106]

very very nice... and what a beauty the engine!!

[butt head 43]

When the gtv was road legal again i took her fore a drive. and then came the problems. the headgaskets were leak 

 

so back to the workshop. to mount a set of new headgaskets. 

 

the gtv beside to my daily. become an expensive month....

 

 

 

 

the cylinders still look nice out for 226,000 km

 

 

 

 

After that was built everything back together I still had a little problem with the circulation to the coolantreservoir 

When that was fixed it was all good with the cooling of the engine. 

 

 

When some on polished for our Dutch annual 916 ride. only under the hood. the exterior needs polishing but that is for an other time.

 

 

 

 

 

[Michael 45]

What did you do with the fuel pipes? Only painting with a golden colour? Or is it a special coating?

 

Best regards

Michael

[butt head 43]

On 14-6-2016 at 00:19, Michael said:

What did you do with the fuel pipes? Only painting with a golden colour? Or is it a special coating?

 

Best regards

Michael

 

It's just chrome paint only then in the color gold. 

 

It only has 1 disadvantage. 
It is not restistens against fuel. with the head gasket Exchange there is some fuel leaked over it so I need to spray them over again....

 

 

 

 

[butt head 43]

in recent months i ditn't do many on the gtv or spider. 

with the gtv I have don a few events. and for the spider another brake upgrade from stoch to 305mm and now for the 330mm brakes. 

 

last month I shoud drive with a friend in a alfa 90 to Italy.  but on the day of departure is the master brake cylinder died. 

so we had another car. his alfa gt jtd had broken drive shafts. My 33 is already 2 months quietly for  waiting for som welding and apk(mot)

the spider still has no engine. 

 

so the gtv was the only option. 

the trip went very well. no problems or anything with the gtv. 

only written of som parts....  tyres brakes and the front suspension arms 

 

 

[Lech 5]

These stones on the third photograph, as punishment did somebody complete it? By the shield of 330 mm and wheel rims of 17 inches, perhaps to be problem with the space for weights for balancing the wheel.

[butt head 43]

as far as I know 330mm brakes in combination with 17" teledails fit. 
joris dit it also with his spider

 

 

I also forgot to tell you that the gtv has now red carpet and motus red seets.

that he received after the holidays 

[Lech 5]

    Sawn 3 mm of the clamp.

[butt head 43]

3 mm is enough, if the rim weights can move between the caliper and Rim can I see no problems. 

at this moment the spider is for a short stray at home because the shed gets a new roof. 
unfortunately i'm unable to sell the gtv. No body want to pay a fair price. 
so also no update's for the spider. 
 

[butt head 43]

After almost 8 months silence, i have a smal update. 

the gtv is no more. because there was no one to buy the gtv and I bought a House. I decided to the gtv to dismantle and sell it in parts. 
but I have still kept the engine and some other small parts. 

the 24v engine is now in the spider. i modifid oem 24 cf1 wire loom to fit my spider. 
also de spider receved a 6 speed with quaffe, short shifter, el front pipes and upgraded sway bars 

This evening, he ran for the first time.

first start of the spider with 24v engine

Edited July 22, 2017 by butt head

[butt head 43]

last weekend was the club day of the Dutch 916 club.
I was just here at the start of the ride. have the ride itself not ridden since the cooling fan at the break.

at the end of August I go to spettacolo sportivo on circuit park assen.

 

and after that its back in the shed.  wiring to adjust for the drop down function of the Windows

and a little conservation. the past 2.5 years, the body didn't survived that well. some small rust 

 

[butt head 43]

https://youtu.be/x8GM6oeqOeQ

[butt head 43]

new brakes 

[butt head 43]

 so finally the new brakes fitted. 
 Porsche cayenne (brembo z17) calipers,  gta 330x32 disk and custom made brackets

and the diffrance in brake pad 
brembo z17 - 305/330 alfa - oem 1 piston caliper

[jonalfaspider 107]

Omg 😲 those brakes look amazing!! What are they like compared too the 166 calipers?

 

where can I buy a Adaptor plate 

[Thanos 193]

Very nice!

Do you have photos of the adapters?

 

[butt head 43]

15 minutes ago, Thanos said:

Very nice!

Do you have photos of the adapters?